144 Core Network Equipment Fiber Optic Dome splice Closure with PLC Splitter

Network Equipment Fiber Optic Dome splice Closure with PLC Splitter

Sealing Performance

Pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Re-entry performance

Re-entry the FOSC 3 times as normal working condition,and pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Mechanical Character

1.Tensile Test: The axial tensile strength should be not less than 800N,and there is not any crack. 

2.Squeezing test: The FOSC can bear 2000N/m2 ,the lasting time is 1 minute.There is not any crack. 

3.Impact test The FOSC can bear 16N.M impact 3 times,there is not any crack. 

4.Bending test: The link part of cables and FOSC can bear 150N bending strength.The bending angle is ±450 ,repeat 10 times,there is not any crack. 

5.Torsion Test: The FOSC can bear 50N.m torsion.The torsion angle is ±90°,repear 10 times,there is not any crack.