1. Product Introduction
ANF72F52 type cable connector box of cap type series of a. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; Product good seal performance, installation simple operation, wide range, it is the best choice of the optical fiber connection.
2. Product description
IP protection level can reach IP68;
Can be installed 1 x "PLC shunt and 2 x for PLC shunt;
With four small round into the cable hole and a large oval into line hole;
Joint box shell by vulcanized rubber for seal;
Cable in and out of holes are hot shrinkage seal
3.Product parameters
Item | Dimension(mm) | In/out ports | Max. cable diameter(mm) | Max. capacity per tray | Disc number | Max capacity(bunchy fiber) | Seal method |
ANF72F52 | Φ190×445 | 5 | 4 of Φ16 | 24cores | 1-6 | 144cores | Heat-shrink seal |
4. Main components
no. | Name of components | quantity | usage | remarks |
1 | FOSC Cover | 1 piece | Comprehensive protection joint |
|
2 | Fuse fiber disc | According to the request | Fixed, save fiber and protect optical fiber hot melt pipe |
|
6 | base | 1 unit | Fixed inside and outside structure |
|
7 | Plastic hoop | 1 set | Fixed base and shell |
|
8 | Type O sealing ring | 1 set | Used to seal base and shell seal |
|


